XGROUND is a modular ground reinforcement grid system for load-bearing and permeable surfaces: parking lots, driveways, paths, camping, storage and logistics areas, paddocks, and riding arenas. Made from 100% recycled LDPE plastic, directly from our own XSOURCE material management, made in Germany. With over 30 years of experience, we are paving the way for the next generation of ground reinforcement grids.
XGROUND®
Ground Reinforcement Grid
The smart ground reinforcement grid system from CONVERTA
Advantages of XGROUND® Ground Reinforcement Grids
Reinforced without sealing
Every ground reinforcement is a decision about where the rain goes. Asphalt and concrete send it into the sewer. XGROUND allows it to seep where it belongs: into the groundwater. The surface bears the load, the soil remains alive, and in many municipalities, the stormwater fee is reduced.
Unsealing
Infiltration
Load distribution
Erosion control
Water retention
Save fees
A ground system full of possibilities: XGROUND® Ground Reinforcement Grid.
Green, load-bearing, durable, and with a 20-year manufacturer’s warranty.
XGROUND® Areas of Application
Optimized for transport
XGROUND was specially developed for the Euro pallet size. Pre-assembled grid modules of 120 × 80 cm are delivered – without overhangs and perfectly nested. The result: more ground reinforcement grids per pallet and thus significantly lower transport costs. Thanks to the pre-assembled modules, you can lay large areas quickly and easily.
Goodbye transport damage
Unlike other systems, XGROUND’s locking lugs are not on the outside but set inwards. This means nothing protrudes on the pallet that could get caught, break off, or snag.
Don’t pay for air during transport
Our 40 and 50 models nest when stacked. This allows up to 2612 m² to be transported per truck, significantly reducing transport costs.
The geometry makes the difference,
in every application.
We have perfected the grid geometry for the next generation of ground reinforcement grids. With XGROUND, not a single wall is straight: each cell is enclosed by four arches, two curved outwards and two inwards, which merge into each other at the nodes without corners. This is not just aesthetics. It determines how much load the surface can bear, how long it remains level, and how much of it fits on a truck.
Optimal load distribution
Other grids transfer weight directly into the ground via a narrow top edge. With XGROUND®, thanks to the curved geometry, the load shifts from the edges to the contact surface. All arches merge into each other at the nodes without corners. Consequently, there are no weak points where tension accumulates and cracks appear after years due to frost.
Uniform base surface
The cells are not fully open at the bottom. Instead, they sit on an additional base surface with defined drainage openings. As a result, the grid sinks in less than systems that rest only on narrow ribs.
Cross-rooting
Openings between the cells allow plants to grow through sideways and root into one another. The curved walls also give the grass more wall length per square meter than a straight grid: more contact area, denser turf. The grass holds the grid, and the grid holds the grass.
More stable and flexible thanks to staggered installation
We have rethought our grid geometry right down to the laying pattern. The result is a ground reinforcement grid that can be laid in a staggered pattern, giving maximum surface stability and flexibility. The offset doesn’t just make the surface more stable. It also gives you a choice of several laying patterns.
2 × 3 modules, staggered
The compromise between speed and stability: the 2 × 3 modules are delivered pre-assembled and laid with each row offset against the next.
XGROUND 40
XGROUND 50
Individual staggering – Maximum stability
If you separate the modules and lay each grid individually in a staggered pattern, you achieve the most stable surface connection. Half-stones ensure a clean finish. Ground pins can provide additional stability on slopes.
XGROUND 40
XGROUND 50
Quick and easy: laid in parallel
The fastest option is to lay the pre-assembled 120 × 80 cm sections exactly as they come off the pallet: module next to module, side by side, with no half units at the edges. Best suited to level areas with light loads.
XGROUND 30
XGROUND 40
XGROUND 50
A new take on car parks
You have two options for marking parking bays. Either lay the 40 × 20 cm half units in a second colour as a continuous strip, or use our marking clips, which push into any cell without sticking out.
XGROUND 50
Our models for landscaping and civil engineering
Our XGROUND® ground reinforcement grids are designed for permeable ground reinforcement in gardening and landscaping, as well as in civil engineering. The grid height and locking lugs ensure the desired stability. Depending on the requirements, grids with drainage openings or water retention are used.
XGROUND®
30 AQUA
Cost-effective reinforcement with water storage, not for vehicle loads
Water management plays a crucial role in many garden applications. This light-duty ground reinforcement grid stores valuable rainwater in its cells and gradually releases it to the surface.
-
Grid height: 30 mm
-
Format: 39 × 59 cm
-
With 10 l/m² water retention
XGROUND®
30
Affordable drainage for non-trafficked areas
Use this permeable paving grid to reinforce light-duty areas such as footpaths and gravel paths. The integrated drainage openings let water soak into the ground in a controlled way, so no mud or puddles form on the surface.
-
Grid height: 30 mm
-
Format: 39 × 59 cm
-
With drainage chambers
XGROUND®
40
The universal professional grid with drainage
XGROUND 40 is our all-rounder among drivable ground reinforcement grids: parking spaces, driveways, courtyards, camping, and landscape areas. Precipitation drains directly into the subsoil through the cells.
-
Grid height: 40 mm
-
Format: 39 × 39 cm
-
Greenable or fillable (gravel, crushed stone)
XGROUND®
50
The robust heavy-duty grid with drainage
Our strongest permeable paving grid, for everything that is heavy and in constant traffic: fire access routes, car parks, forest tracks. Its continuous base spreads the load across the whole ground instead of concentrating it through narrow edges. As a result, XGROUND sinks in less and stays level even after years of use.
-
Grid height: 50 mm
-
Format: 39 × 39 cm
-
Greenable or fillable (gravel, crushed stone)
-
Also available as a half-stone
-
Interconnectable for additional stability against shear forces
XGROUND®
30 AQUA
Cost-effective reinforcement with water storage, not for vehicle loads
Water management plays a crucial role in many garden applications. This light-duty ground reinforcement grid stores valuable rainwater in its cells and gradually releases it to the surface.
-
Grid height: 30 mm
-
Format: 59 × 39 cm
-
With 10 l/m² water retention
XGROUND®
30
Affordable drainage for non-trafficked areas
Use this permeable paving grid to reinforce light-duty areas such as footpaths and gravel paths. The integrated drainage openings let water soak into the ground in a controlled way, so no mud or puddles form on the surface.
-
Grid height: 30 mm
-
Format: 59 × 39 cm
-
With drainage chambers
XGROUND®
40
The universal professional grid with drainage
XGROUND® 40 is our all-rounder among drivable ground reinforcement grids: parking spaces, driveways, courtyards, camping, and landscape areas. Precipitation drains directly into the subsoil through the cells.
-
Grid height: 40 mm
-
Format: 39 × 39 cm
-
Greenable or fillable (gravel, crushed stone)
XGROUND®
50
The robust heavy-duty grid with drainage
Our strongest permeable paving grid, for everything that is heavy and in constant traffic: fire access routes, car parks, forest tracks. Its continuous base spreads the load across the whole ground instead of concentrating it through narrow edges. As a result, XGROUND sinks in less and stays level even after years of use.
-
Grid height: 50 mm
-
Format: 39 × 39 cm
-
Greenable or fillable (gravel, crushed stone)
-
Also available as a half-stone
-
Interconnectable for additional stability against shear forces
Matching accessories
Mark parking bays the smart way. Our bay markers push into every third cell, with no tools and no adhesive, and form a continuous, even line. At 46 mm high, they sit below the top of the 50 mm grid, so in winter the snowplough blade simply passes over them.
Simply push-fit, no tools needed
- 81 × 76 × 46 mm
- 26 g per marking clip
- Made from 100% recycled plastic
Ground pins
-
600 mm length
-
12 mm diameter
-
580 g weight
-
Made from rebar
Technical
Details
Models and Dimensions
| XGROUND® 30 AQUA | XGROUND® 30 | XGROUND® 40 | XGROUND® 50 | XGROUND® 50 (Half) | |
|---|---|---|---|---|---|
| Model designation | GR30 604 | G30 604 | X40 404 | X50 404 | X50 402 |
| Color | Black | Black | Black | Black | Black |
| Dimensions | 39 × 59 × 3 cm | 39 × 59 × 3 cm | 39 × 39 × 4 cm | 39 × 39 × 5 cm | 19.5 × 39 × 5 cm |
| Wall height | 30 mm | 30 mm | 40 mm | 50 mm | 50 mm |
| Wall thickness Ø | 3.4 mm | 3.4 mm | 3 mm | 4 mm | 4 mm |
Area and Weight
| XGROUND® 30 AQUA | XGROUND® 30 | XGROUND® 40 | XGROUND® 50 | XGROUND® 50 (Half) | |
|---|---|---|---|---|---|
| Weight kg/pc. | 0.92 | 0.91 | 0.968 | 1.32 | 0,72 |
| Weight kg/m² | 4 | 3.96 | 6.36 | 8.67 | 9,47 |
| Pcs./m² | 4.35 | 4.35 | 6.57 | 6.57 | 13,15 |
| Pcs./layer | 4 = 0.92 m² | 4 = 0.92 m² | 6 = 0.91 m² | 6 = 0.91 m² | 13.15 = 0.91 m² |
| Water storage | approx. 15.65 l/m² | – | – | – | – |
| Layers/pallet | 75 | 75 | 87 | 74 | 33 |
| Pcs./pallet | 300 | 300 | 474 | 432 | 330 |
| Pcs./truck | 10,200 | 10,200 | 15,642 | 14,256 | 22.400 |
| m²/pallet general cargo | 62.56 | 62.56 | 71.89 | 60.97 | – |
| kg/pallet gross general cargo | 276 | 273 | 502 | 534 | – |
| m²/pallet | 69 | 69 | 79.17 | 67.34 | 30,03 |
| kg/pallet gross | 281 | 278 | 509 | 589 | 289 |
| Plastic pallet | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm |
| LxWxH incl. pallet | 120 × 80 × 240 cm | 120 × 80 × 240 cm | 120 × 80 × 243 cm | 120 × 80 × 243 cm | 120 × 80 × 232 cm |
Transport
| XGROUND® 30 AQUA | XGROUND® 30 | XGROUND® 40 | XGROUND® 50 | XGROUND® 50 (Half) | |
|---|---|---|---|---|---|
| Pallets | 33 | 33 | 33 | 33 | 66 |
| m² | 2,277 | 2,277 | 2,612.61 | 2,222.22 | 1.981,98 |
| Gross kg incl. pal./truck approx. | 9,278 | 9,179 | 16,781 | 19,437 | 19.095 |
Example truck
Length: 13.60 m, Width: 2.48 m and Height: 2.60 m to 2.70 m
XGROUND® Ground Reinforcement Grid
for equestrian sports
The smart ground reinforcement grid system from CONVERTA for equestrian sports and agriculture
The correct ground construction and the selection of suitable separation layers determine comfort, suitability for discipline, longevity, irrigation costs, and not least the well-being of animals and humans. That is why we have incorporated our over 30 years of experience in equestrian sports and agricultural surface reinforcement into the next generation of ground reinforcement grids.
XGROUND® Areas of Application in Equestrian Sports and Agriculture
ARENA and PADDOCK
Retention…
XGROUND ARENA AQUA stores water in the cells. Moisture rises from below into the riding surface, preserving the footing’s natural properties and keeping dust down. As a result, the arena needs watering far less often and is rideable again sooner after rain.
… and drainage.
XGROUND PADDOCK grid lets rain and other liquids drain freely down into the
sub-base instead of pooling on the surface. That keeps the turnout dry and clean, and your horses’ hooves healthy. Because the grid separates the sand from the sub-base,
the two don’t mix, even after years of use.
The XGROUND® ARENA Series
Our ARENA series reinforces professional riding surfaces: suited to each discipline, cost-effective, and with every function a good equestrian surface needs. Riding arena grids for indoor and outdoor arenas, polo grounds, round pens and tölt tracks. Safe and durable when laid in a staggered bond, available with either drainage or water storage.
XGROUND®
ARENA
40
The best-value grid for your arena
ARENA 40 is our bestseller in arena construction. A grid for high demands, with solid load-bearing capacity and everything needed for every discipline.
-
Optimal drainage: water drains directly
-
No mixing of sand and sub-base
XGROUND®
ARENA
50
The durable premium riding arena grid
Our riding arena grid for even more surface elasticity and stability across the whole area.
-
Highly load-bearing grids for maximum riding comfort
-
Optimal drainage and separation layer
-
Profiled top edge for better footing layer retention
XGROUND®
ARENA
50 AQUA
Upgrade with water retention
Like ARENA 50, but with additional water retention for optimal soil moisture.
-
With 12.5 l/m² water retention, the grid with the largest water storage capacity
XGROUND®
ARENA
40
The best-value grid for your arena
ARENA 40 is our bestseller in arena construction. A grid for high demands, with solid load-bearing capacity and everything needed for every discipline.
-
Optimal drainage: water drains directly
-
No mixing of sand and sub-base
XGROUND®
ARENA
50
The durable premium riding arena grid
Our riding arena grid for even more surface elasticity and stability across the whole area.
-
Highly load-bearing grids for maximum riding comfort
-
Optimal drainage and separation layer
-
Profiled top edge for better footing layer retention
XGROUND®
ARENA
50 AQUA
Upgrade with water retention
Like ARENA 50, but with additional water retention for optimal soil moisture.
-
With 12.5 l/m² water retention, the grid with the largest water storage capacity
Technical
Details
Models and Dimensions
| ARENA 30 | ARENA 30 AQUA | ARENA 40 | ARENA 40 AQUA | ARENA 50 | ARENA 50 (Half) | ARENA 50 AQUA | ARENA 50 AQUA (Half) | |
|---|---|---|---|---|---|---|---|---|
| Model designation | HS30 604 | HR30 604 | HXS40 404 | HXR40 404 | HXS50 404 | HXS50 402 | HXR50 404 | HXR50 402 |
| Color | Terracotta | Terracotta | Terracotta | Terracotta | Terracotta | Terracotta | Terracotta | Terracotta |
| Dimensions | 39 × 59 × 3 cm | 39 × 59 × 3 cm | 39 × 39 × 4 cm | 39 × 39 × 4 cm | 39 × 39 × 5 cm | 19.5 × 39 × 5 cm | 39 × 39 × 5 cm | 19.5 × 39 × 5 cm |
| Wall height | 30 mm | 30 mm | 40 mm | 40 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Wall thickness Ø | 3.4 mm | 3.4 mm | 3 mm | 3 mm | 4 mm | 4 mm | 4 mm | 4 mm |
Area and Weight
| ARENA 30 | ARENA 30 AQUA | ARENA 40 | ARENA 40 AQUA | ARENA 50 | ARENA 50 (Half) | ARENA 50 AQUA | ARENA 50 AQUA (Half) | |
|---|---|---|---|---|---|---|---|---|
| Weight kg/pc. | 0.91 | 0.92 | 0.968 | 0.999 | 1.29 | 0.7 | 1.404 | 0.76 |
| Weight kg/m² | 3.96 | 4 | 6.36 | 6.56 | 8.48 | 9.21 | 9.22 | 9.99 |
| Pcs./m² | 4.35 | 4.35 | 6.57 | 6.57 | 6.57 | 13.15 | 6.57 | 13.15 |
| Pcs./layer | 4 = 0.92 m² | 4 = 0.92 m² | 6 = 0.91 m² | 6 = 0.91 m² | 6 = 0.91 m² | 13.15 = 0.91 m² | 6 = 0.91 m² | 13.15 = 0.91 m² |
| Water storage | – | approx. 10 l/m² | – | approx. 11.69 l/m² | – | – | approx. 12.5 l/m² | approx. 12.5 l/m² |
| Layers/pallet | 75 | 75 | 87 | 87 | 74 | 33 | 74 | 33 |
| Layers/pallet general cargo | 69 | 69 | 79 | 79 | 67 | – | 67 | – |
| Pcs./pallet | 300 | 300 | 522 | 474 | 444 | 330 | 444 | 330 |
| Pcs./truck | 9,900 | 9,900 | 17,226 | 15,642 | 14,652 | 21,780 | 14,652 | 21,780 |
| m²/pallet general cargo | 62.79 | 62.79 | 71.89 | 71.89 | 60.97 | – | 60.97 | – |
| kg/pallet gross general cargo | 273 | 276 | 502 | 519 | 522 | – | 567 | – |
| m²/pallet | 69 | 69 | 79.17 | 79.17 | 67.34 | 30.03 | 67.34 | 30.03 |
| kg/pallet gross | 278 | 281 | 509 | 525 | 576 | 281 | 626 | 305 |
| Plastic pallet | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm |
| LxWxH incl. pallet | 120 × 80 × 240 cm | 120 × 80 × 240 cm | 120 × 80 × 243 cm | 120 × 80 × 243 cm | 120 × 80 × 243 cm | 120 × 80 × 232 cm | 120 × 80 × 243 cm | 120 × 80 × 232 cm |
Transport
| ARENA 30 | ARENA 30 AQUA | ARENA 40 | ARENA 40 AQUA | ARENA 50 | ARENA 50 (Half) | ARENA 50 AQUA | ARENA 50 AQUA (Half) | |
|---|---|---|---|---|---|---|---|---|
| Pallets | 33 | 33 | 33 | 33 | 33 | 66 | 33 | 66 |
| m² | 2,277 | 2,277 | 2,612.61 | 2,612.61 | 2,222.22 | 1,981.98 | 2,222.22 | 1,981.98 |
| Gross kg incl. pal./truck approx. | 9,179 | 9,278 | 16,781 | 17,293 | 18,999 | 18,574 | 20,663 | 20,138 |
Example truck
Length: 13.60 m, Width: 2.48 m and Height: 2.60 m to 2.70 m
The XGROUND® PADDOCK Series
In the paddock, what matters is load-bearing capacity and a mud-free surface to prevent hoof problems. Thanks to their drainage chambers, our four PADDOCK paddock grids reliably drain contaminants and moisture into the ground. Laid in a staggered bond, they withstand even the heaviest hoof loads. Our GRIP variant also features a profiled top edge that keeps bedding and sand in place.
XGROUND®
PADDOCK
40
The paddock grid with drainage for shallow cover
PADDOCK 40 keeps the riding surface and sub-base permanently separate, and reliably drains rain and other liquids downwards.
-
Optimal drainage: water drains directly
-
Straight top edge for machine maintenance and applications with little cover
-
No mixing of sand and sub-base
XGROUND®
PADDOCK
50
The durable premium paddock grid for turnout and stable
PADDOCK 50 is our ground reinforcement grid for high-traffic areas that must withstand heavy loads, e.g., horse walkers, paddocks, and open- and active stables.
-
Like PADDOCK 40, but even stronger and durable
-
Straight top edge suitable for machine maintenance
-
Also for applications with minimal sub-base
XGROUND®
PADDOCK
50 GRIP
The upgrade
When used with a cover layer, the profiled top edge reduces migration of the surface material.
-
Reduces the risk of slipping
XGROUND®
PADDOCK
40
The paddock grid with drainage for shallow cover
PADDOCK 40 keeps the riding surface and sub-base permanently separate, and reliably drains rain and other liquids downwards.
-
Optimal drainage: water drains directly
-
Straight top edge for machine maintenance and applications with little cover
-
No mixing of sand and sub-base
XGROUND®
PADDOCK
50
The durable premium paddock grid for turnout and stable
PADDOCK 50 is our ground reinforcement grid for high-traffic areas that must withstand heavy loads, e.g., horse walkers, paddocks, and open- and active stables.
-
Like PADDOCK 40, but even stronger and durable
-
Straight top edge suitable for machine maintenance
-
Also for applications with minimal sub-base
XGROUND®
PADDOCK
50 AQUA
The upgrade
When used with a cover layer, the profiled top edge reduces migration of the surface material.
-
Reduces the risk of slipping
Technical
Details
Models and Dimensions
| PADDOCK 40 | PADDOCK 50 | PADDOCK 50 (Half) | PADDOCK 50 GRIP | PADDOCK 50 GRIP (Half) | |
|---|---|---|---|---|---|
| Model designation | HX40 404 | HX50 404 | HX50 402 | HXS50 404 | HXS50 402 |
| Color | Terracotta | Terracotta | Terracotta | Terracotta | Terracotta |
| Dimensions | 39 × 39 × 4 cm | 39 × 39 × 5 cm | 19.5 × 39 × 5 cm | 39 × 39 × 5 cm | 19.5 × 39 × 5 cm |
| Wall height | 40 mm | 50 mm | 50 mm | 50 mm | 50 mm |
| Wall thickness Ø | 3 mm | 4 mm | 4 mm | 4 mm | 4 mm |
Area and Weight
| PADDOCK 40 | PADDOCK 50 | PADDOCK 50 (Half) | PADDOCK 50 GRIP | PADDOCK 50 GRIP (Half) | |
|---|---|---|---|---|---|
| Weight kg/pc. | 0.968 | 1.32 | 0.72 | 1.29 | 0,7 |
| Weight kg/m² | 6.36 | 8.67 | 9.47 | 8.48 | 9,21 |
| Pcs./m² | 6.57 | 6.57 | 13.15 | 6.57 | 13,15 |
| Pcs./layer | 6 = 0.91 m² | 6 = 0.91 m² | 13.5 = 0.91 m² | 6 = 0.91 m² | 13.5 = 0.91 m² |
| Water storage | – | – | – | – | – |
| Layers/pallet | 87 | 74 | 33 | 74 | 33 |
| Layers/pallet general cargo | 79 | 67 | – | 67 | – |
| pcs./pallet | 522 | 444 | 330 | 444 | 330 |
| pcs./truck | 17,226 | 14,652 | 21,780 | 14,652 | 21.780 |
| m²/pallet, general cargo | 71.89 | 60.97 | – | 60.97 | – |
| kg/pallet gross, general cargo | 502 | 534 | – | 522 | – |
| m²/pallet | 79.17 | 67.34 | 30.03 | 67.34 | 30,03 |
| kg/pallet gross | 509 | 589 | 289 | 576 | 281 |
| Plastic pallet | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm | 5 kg, H=15 cm |
| LxWxH incl. pallet | 120 × 80 × 243 cm | 120 × 80 × 243 cm | 120 × 80 × 232 cm | 120 × 80 × 243 cm | 120 × 80 × 232 cm |
Transport
| PADDOCK 40 | PADDOCK 50 | PADDOCK 50 (Half) | PADDOCK 50 GRIP | PADDOCK 50 GRIP (Half) | |
|---|---|---|---|---|---|
| Pallets | 33 | 33 | 66 | 33 | 66 |
| m² | 2,612.61 | 2,222.22 | 1,981.98 | 2,222.22 | 1.981,98 |
| Gross kg incl. pallets/truck approx. | 16,781 | 19,437 | 19,095 | 18,999 | 18.574 |
Example truck
Length: 13.60 m, Width: 2.48 m and Height: 2.60 m to 2.70 m
FAQ
Which XGROUND® variant do I need for my surface?
The answer depends on the weight driving over it. For cars, lorries or emergency vehicles, XGROUND 40 or XGROUND 50 is the right choice, depending on the load and ground construction. On areas without vehicle traffic, such as green spaces in landscaping, XGROUND 30 is sufficient. In equestrian sport, it depends on how the area is used: our PADDOCK series for turnout that needs to stay dry, and our ARENA series for riding arenas, where the riding surface needs moisture.
How much load can XGROUND® bear?
It is never the grid alone that provides load-bearing capacity, but always the entire structure: compacted subgrade, base course, grid, and infill. XGROUND 40 and XGROUND 50 transfer the load into the sub-base via the continuous bearing surface instead of releasing it at points via narrow edges—this is why the surface remains level. In addition, wall thickness varies by variant. For specific load values for each variant, please feel free to contact us.
Will XGROUND® reduce my stormwater fee?
In many cases, yes. Municipalities apply a lower runoff coefficient to infiltration-capable surfaces such as grass pavers than to asphalt or concrete—often only a fraction of the area is charged. The exact amount is defined by each municipality in its bylaws. We recommend checking with the municipality before starting the project.
What is the difference between PADDOCK and ARENA?
How they handle water. PADDOCK drains precipitation downward so the turnout area stays dry. ARENA retains it in the cells so the riding surface layer above stays moist and therefore firm and low-dust.
What goes underneath the grid?
That depends on the intended use. For trafficked areas, a load-bearing, compacted sub-base is essential, usually made of crushed stone. For riding surfaces, a separation geotextile is also recommended to prevent the base course and riding surface layer from mixing. For pure green areas without vehicle traffic, a graded, compacted formation level is generally sufficient.
How do I finish the surface at the edges?
You cut the grid to size. With XGROUND, there are deliberately no edge or ramp elements—one less component to plan, order and stock. The half grids in the 19.5 × 39 cm format also compensate for the offset.
Can I install XGROUND® temporarily and remove it again?
Yes. When installed upside down, the continuous bearing surface creates a walkable surface for events, concerts and festivals. After the event, the surface is removed, cleaned and stored.
How long has XGROUND® been available?
The grid is new, but the experience behind it is not. XGROUND incorporates over 30 years of practical experience with non-sealed ground reinforcement—from tool design and on-site installation to transport optimization. The team behind XGROUND are among the pioneers of ground reinforcement and material processing in Germany.